Network Connectivity Guide
Advanced Technical Framework for The Satoshi Terminal
Overview
This Network Connectivity Guide provides comprehensive technical instructions for configuring and optimizing The Satoshi Terminal's network infrastructure. Proper network setup is essential to ensure seamless data access, low-latency performance, and secure communications for cryptocurrency analysis and trading. This guide outlines hardware requirements, supported protocols, advanced configurations, and troubleshooting techniques.
Purpose
The objectives of this guide are:
Optimal Performance: Enable real-time data feeds and low-latency connectivity.
Security: Ensure encrypted communication and compliance with cybersecurity best practices.
Reliability: Minimize downtime through robust network design and failover strategies.
Scalability: Support multi-user environments and high-bandwidth operations.
Network Requirements
The Satoshi Terminal relies on stable, high-speed network connections. Below are the minimum and recommended specifications:
Parameter
Minimum Requirements
Recommended Requirements
Connection Type
Ethernet (Cat 5e) or Wi-Fi 5
Ethernet (Cat 6a) or Wi-Fi 6
Bandwidth
10 Mbps download, 5 Mbps upload
50 Mbps download, 20 Mbps upload
Latency
≤50 ms
≤20 ms
Firewall Ports
Open: 443 (HTTPS), 22 (SFTP)
Open: 443, 22, 123 (NTP)
Encryption Protocols
TLS 1.2
TLS 1.3
Network Hardware Configuration
Router and Switch Requirements
Router:
Support for NAT, DHCP, and port forwarding.
Minimum 1 Gbps WAN throughput.
Switch:
Managed switch supporting VLANs and QoS.
Minimum 8-port Gigabit Ethernet capability.
Cabling
Use Cat 6a Ethernet cables for wired connections to minimize crosstalk and support higher data rates.
Ensure cable lengths do not exceed 100 meters between endpoints and switches.
Access Points
Deploy Wi-Fi 6 (802.11ax) access points for wireless connections.
Configure dual-band support (2.4 GHz for range, 5 GHz for speed).
Power Backup
Use uninterruptible power supplies (UPS) for routers, switches, and access points to maintain connectivity during outages.
Supported Protocols and Standards
The Satoshi Terminal adheres to the following network protocols and standards for optimal operation:
IPv4/IPv6: Dual-stack support for broader compatibility and future readiness.
DNS: Configurable DNS settings for faster domain resolution (e.g., Google Public DNS or Cloudflare DNS).
DHCP: Dynamic IP assignment for simplified network management.
TLS: Secure communication using TLS 1.2/1.3 for data encryption.
SFTP: For secure file transfers between the terminal and external servers.
Network Configuration Steps
1. Wired Connection Setup
Connect the terminal to the router or switch using a Cat 6a Ethernet cable.
Verify link speed (1 Gbps recommended).
Configure static IP or enable DHCP based on network policies:
Static IP Example:
IP Address:
192.168.1.100Subnet Mask:
255.255.255.0Gateway:
192.168.1.1
2. Wireless Connection Setup
Navigate to Network Settings → Wi-Fi Configuration.
Select the appropriate SSID and enter the WPA2/WPA3 password.
Perform a connectivity test using built-in diagnostics.
3. Proxy Configuration (if applicable)
Go to Network Settings → Proxy.
Enter proxy details:
Proxy Type: HTTP/HTTPS or SOCKS5.
Proxy Address:
proxy.example.com.Port:
8080.
Test the connection to ensure data feeds are not blocked.
4. Firewall and Port Forwarding
Open required ports on the router or firewall:
Port 443: For HTTPS data feeds.
Port 22: For secure file transfers.
Port 123: For NTP time synchronization.
Configure port forwarding for multi-terminal setups.
Security Configurations
1. Encryption
Enable TLS 1.3 wherever supported for improved encryption strength and reduced handshake latency.
Use SSH keys for secure remote access to terminal services.
2. Network Segmentation
Implement VLANs to isolate The Satoshi Terminal from less secure devices.
Example:
VLAN 10: Terminals and critical systems.
VLAN 20: Guest devices.
3. Intrusion Detection and Prevention
Deploy intrusion detection systems (IDS) or intrusion prevention systems (IPS) to monitor traffic for suspicious activities.
4. Access Control
Restrict administrative access to trusted IP ranges.
Use multi-factor authentication (MFA) for remote management.
Advanced Configurations
1. QoS (Quality of Service)
Prioritize terminal traffic to ensure uninterrupted data feeds.
Example QoS Policy:
Classify traffic by port (e.g., Port 443 for HTTPS).
Assign high-priority bandwidth allocation.
2. Failover Connections
Configure a secondary WAN connection for redundancy.
Use dynamic routing protocols (e.g., OSPF) for seamless failover.
3. VPN Integration
Establish a VPN for secure remote connections to corporate networks.
Supported Protocols: OpenVPN, IPsec, or WireGuard.
Performance Testing and Optimization
Network Speed Test
Use tools like
iperf3to measure bandwidth and latency.Example Command:
Ping and Latency Test
Test latency to key data endpoints:
Packet Loss Detection
Use
mtrortracerouteto identify network bottlenecks.Example Command:
Common Issues and Solutions
Issue
Cause
Solution
Data Feed Delays
High latency or insufficient bandwidth
Upgrade to a faster internet connection or prioritize traffic.
Connection Drops
Weak Wi-Fi signal or outdated drivers
Use wired connections or update network adapters.
SSL/TLS Errors
Expired certificates or mismatched encryption protocols
Update certificates and enforce TLS 1.2/1.3.
Blocked Data Feeds
Firewall rules or proxy misconfigurations
Adjust firewall rules to allow required ports.
Best Practices
Regular Updates
Keep network device firmware and The Satoshi Terminal software up to date.
Periodic Testing
Schedule routine tests to evaluate network performance and security.
Network Documentation
Maintain detailed network diagrams and configurations for troubleshooting.
Monitoring Tools
Use tools like Nagios or SolarWinds for real-time network monitoring.
Last updated